 |
316Ti
Shanqi
Product Description
25Cr-20Ni Cold Rolled 0.5 mm 316Ti Stainless Steel Coil
Usually, according to the metallographic structure, ordinary stainless steel is divided into three categories: austenitic stainless steel, ferritic stainless steel, martensitic stainless steel. On the basis of these three basic metallographic structures, for specific needs and purposes, dual-phase steels, precipitation-hardening stainless steels and high-alloy steels with an iron content of less than 50% are derived.
1. Austenitic stainless steel. The matrix is dominated by austenite structure (CY phase) of face-centered cubic crystal structure, non-magnetic, and is mainly strengthened by cold working (and may lead to certain magnetic properties) stainless steel. The American Iron and Steel Institute is designated by numbers in the 200 and 300 series, such as 304.
2. Ferritic stainless steel. The matrix is dominated by the ferrite structure ((a phase) of the body-centered cubic crystal structure, which is magnetic and generally cannot be hardened by heat treatment, but can be slightly strengthened by cold working. The American Iron and Steel Institute is marked with 430 and 446.
3. Martensitic stainless steel. The matrix is a martensitic structure (body-centered cubic or cubic), magnetic, and its mechanical properties can be adjusted by heat treatment. The American Iron and Steel Institute is designated by the numbers 410, 420 and 440. Martensite has an austenite structure at high temperature, and when cooled to room temperature at an appropriate rate, the austenite structure can be transformed into martensite (ie, hardened).
4. Austenitic-ferritic (duplex) stainless steel. The matrix has both austenite and ferrite two-phase structure, and the content of the less-phase matrix is generally more than 15%. It is magnetic and can be strengthened by cold working. 329 is a typical duplex stainless steel. Compared with austenitic stainless steel, dual-phase steel has high strength, and the resistance to intergranular corrosion and chloride stress corrosion and pitting corrosion are significantly improved.
5. Precipitation hardening stainless steel. The matrix is austenite or martensitic structure and can be hardened by precipitation hardening. The American Iron and Steel Institute is marked with a 600 series number, such as 630, which is 17-4PH.
Generally speaking, in addition to alloys, the corrosion resistance of austenitic stainless steel is relatively excellent. In a less corrosive environment, ferritic stainless steel can be used. In a mildly corrosive environment, if the material is required to have high For strength or high hardness, martensitic stainless steel and precipitation hardening stainless steel can be used.
Shanqi Iron & Steel (Shandong) Co., Ltd. established in 2005, is a collectivized company integrating industrial manufacturing, construction and real estate development. The company covers an area of more than 340 acres, with registered capital of RMB 280.88 million and more than 3,000 employees.
With more than ten years of experience in this industry we have established long-term cooperative relationships with companies in many countries around the world, mainly includes: Southeast Asian countries, African countries, South American countries.
Q: What kind of work does your company do?
A: We are a business steel industry and trade. We mainly produces stainless steel plate/pipe/coil/round bars etc.
Q: What are the advantages of your company?
A: (1): Prime quality and Competitive price.
(2): Excellent experiences with after-sale service.
(3): Every process will be checked by responsible QC which insures every product's quality.
(4): Professional packing teams which keep every packing safely.
(5): Samples can be provided as your requirements.
Q: What is your terms of payment ?
A: Can be negotiated by both parties. If you have another question, pls feel free to contact us as below
Q: What about your price?
A: Our price is very competitive.
Pls feel free to contact us if you are interested in our products.
Q: How long is your delivery time?
A: Stock steel/Steel for simple cutting/Small amount of general standard steel: about 5-20 days for delivery; Custom steel/bulk steel: about 15-30 days for delivery. Contact us for specific delivery times.